How to choose an EWC code
Start with where the waste came from. Then find out what’s in it.
17 02 01
Chapter 17. Construction and demolition
Wood
Wood from building or demolition work.
Stripped out of a building: 17 02 01, Wood.
Look in the chapter for where it came from
The list sets the order to look in. Waste from building and demolition work is in chapter 17, so most site waste is found at the first step.
- 01Mining and quarrying (searched at this step)
- 02Farming and food (searched at this step)
- 03Wood processing, paper (searched at this step)
- 04Leather and textiles (searched at this step)
- 05Oil refining (searched at this step)
- 06Inorganic chemicals (searched at this step)
- 07Organic chemicals (searched at this step)
- 08Paints, adhesives, inks (searched at this step)
- 09Photo industry (searched at this step)
- 10Thermal processes (searched at this step)
- 11Metal surface treatment (searched at this step)
- 12Shaping metals and plastics (searched at this step)
- 13Oils and liquid fuels
- 14Solvents and refrigerants
- 15Packaging, rags, filters
- 16Not otherwise specified
- 17Construction and demolition (searched at this step)
- 18Healthcare (searched at this step)
- 19Waste and water treatment (searched at this step)
- 20Municipal (searched at this step)
From The List of Waste, as retained in UK law, GOV.UK, Construction and demolition waste: how to classify and GOV.UK, Packaging waste and recyclables: how to classify.
An asterisk means hazardous, and most site codes come in pairs
A code with an asterisk is hazardous waste. Most construction codes have a partner, one with an asterisk and one without, and what’s in the waste decides which applies.
Always hazardous
20 01 21* fluorescent tubes and other mercury-containing waste
Non-hazardous in most cases
15 01 01 paper and cardboard packaging. With hazardous residue in it, it’s 15 01 10*.
Depends what’s in it
17 08 02 or 17 08 01* plasterboard
WM3 calls the first two absolute entries and the pairs mirror entries.
Chapter 17, every code. Tap one.
17 03 03*
coal tar and tarred products
Absolute entry. Always hazardous.
From The List of Waste, as retained in UK law and Environment Agency, Waste classification technical guidance (WM3).
Follow one load to its code
Choose a load and say what you know about it. A mirror entry has no code until you know what’s in the waste.
Plasterboard. No hazardous substances in it.
Where did it come from?
Building work, so chapter 17, construction and demolition.
What is it?
17 08 gypsum-based construction material. Two codes fit.
17 08 02or17 08 01*
What’s in it?
The code that fits what you said
17 08 02
gypsum-based construction materials other than those mentioned in 17 08 01
It moves on a waste transfer note.
Start a transfer note with 17 08 02
17 08 02, gypsum-based construction materials other than those mentioned in 17 08 01.
From Environment Agency, Waste classification technical guidance (WM3) and GOV.UK, Construction and demolition waste: how to classify.
How to find out what’s in it
From how it was made or used, the product’s safety data sheet, or samples tested by a lab. The results are checked against 15 hazardous properties, HP 1 to HP 15.
- How it was made or used
- The product’s safety data sheet
- Samples tested by a lab
Checked against 15 hazardous properties
- HP 1 Explosive
- HP 2 Oxidising
- HP 3 Flammable
- HP 4 Irritant
- HP 5 Organ toxicity
- HP 6 Acute toxicity
- HP 7 Carcinogenic
- HP 8 Corrosive
- HP 9 Infectious
- HP 10 Toxic for reproduction
- HP 11 Mutagenic
- HP 12 Gives off toxic gas
- HP 13 Sensitising
- HP 14 Ecotoxic
- HP 15 Can become hazardous
Old tarmac, tested
WM3 uses benzo[a]pyrene as the marker for coal tar. At 50 mg/kg or more in the black top, the tarmac is 17 03 01*.
From Environment Agency, Waste classification technical guidance (WM3).
Each waste in a skip has its own code
A lead battery thrown in with untreated timber is two wastes, 17 02 01 and 16 06 01*. Keep them apart. Hazardous waste must not be mixed with other waste.
- 17 02 01
for the whole skipis wrong
One code for the lot misses the battery. Hazardous waste must not be mixed with other waste.
From Environment Agency, Waste classification technical guidance (WM3).
What goes on the transfer note
The code and a written description of the waste, with how it’s contained, how much, the time and place, both parties and both signatures. A code with an asterisk moves on a consignment note instead.
Waste transfer note
- Description of the waste
- Plasterboard offcuts from strip-out, no hazardous substances
- EWC code
- 17 08 02
- Loose or in a container, and what kind
- Quantity
- Time and place of transfer
- Giver’s name, address, SIC code, and whether producer, carrier or other
- Taker’s name, address, role, and permit or registration number
- The waste hierarchy has been applied
- Signatures of both
Keep transfer notes for at least 2 years. Both the giver and the taker keep a copy.
Hazardous waste in England and Wales moves on a consignment note. In England the producer keeps it for 3 years. Scotland calls it special waste.
Classify the waste before it’s collected. That is the job of whoever produces or holds it.
From The Waste (England and Wales) Regulations 2011, regulation 35, GOV.UK, Hazardous waste: producers and holders and Defra, Waste duty of care: code of practice.
Find the code for your load
The finder lists the codes that can apply to a material, with each one’s partner. Which applies depends on where the waste came from and what’s in it.
A note started here opens as a new note. Notes you are working on stay as they are.
Sources
- The List of Waste, as retained in UK law
- Environment Agency, Waste classification technical guidance (WM3)
- GOV.UK, Construction and demolition waste: how to classify
- GOV.UK, Packaging waste and recyclables: how to classify
- The Waste (England and Wales) Regulations 2011, regulation 35
- GOV.UK, Hazardous waste: producers and holders
- Defra, Waste duty of care: code of practice
Checked against the list, WM3 and GOV.UK on .