Skip to content

Impact wrench HAVS calculator One worker’s estimated daily hand-arm vibration exposure across all their tools.

  • Free, no account
  • 100 points after 30 min to 2 hours on HSE’s figures
  • Nothing is stored
Tool 1
Which type?
Time in use today

Only the time the tool is running in their hands. Breaks add up, they do not reset it.

Not counted yet: type not chosen.

Daily exposure

No result yet

Not counted yet: Impact wrench (type not chosen).

400daily limit0no result yet
About this estimate

Based on HSE-published data (HSE, Vibration risk assessment, Table 1 "Some typical vibration levels for common tools", read 16 September 2026) and, for a named make and model, the figure its maker declares in its manual or product information. HSE and the makers have not reviewed or endorsed this calculator. An estimate to support an exposure assessment, not a measurement, a risk assessment or a compliance certificate.

Impact wrench vibration by drive size

HSE publishes 2 figures for impact wrenches, one for each type below.

Impact wrench vibration Also called impact gun, nut runner or wheel gun
Type100 points after400 points after
3/8, 1/2 and 3/4 inch drive 5 m/s², range 3 to 62 hours8 hours
1 inch drive 10 m/s², range 7 to 1130 min2 hours

An hour on an impact wrench is 50 to 200 points

Points are 2 × vibration² × hours of trigger time: 50 an hour at 5 m/s², 200 at 10 m/s². Every other tool that person uses adds to the same day. If you have the impact wrench’s own figure from its handbook or a measurement, enter that instead.

Daily exposureWhat the employer must do
Under 100 pointsKeep exposure as low as you reasonably can. Workers who already have symptoms still need protecting.
100 points Action value, 2.5 m/s² A(8)Reduce exposure, and give training and health checks to those regularly exposed.
400 points Limit value, 5 m/s² A(8)Cut exposure at once, find out why, and change the work so it does not happen again.