K049 RCRA waste code Toxic solids from the oily emulsion in refinery slop tanks.
- Free, no account
- Based on 40 CFR 261.32 and EPA hazardous-waste rules
- Nothing is stored
Find a federal hazardous waste code
K049, Slop-oil emulsion solids from a petroleum refinery.
K-listed waste
Slop-oil emulsion solids from a petroleum refinery
Industry: Petroleum refining.
Is K049 hazardous waste?
Yes. K049 is nonacute K-listed hazardous waste when the waste comes from the named process and matches the named stream. The federal table gives it hazard code (T), toxicity.
A K listing depends on where and how the waste was made, not on a test result alone. A test may add a characteristic code, but it doesn't remove the listing.
On a required hazardous waste manifest, put K049 in Item 13. Check the VSQG exemptions and empty-container rules too.
What does K049 cover?
Slop oil emulsion solids from petroleum refining. The 261.4(a)(12)(i) recycling exclusion applies only if the solids goes back into refining with no land placement or speculative accumulation first. For thermal cracking, the coke must also be nonhazardous.
- Hazard code
- (T), toxicity
- Industry
- Petroleum refining
- Rule
- 40 CFR 261.32
Is refinery slop-oil emulsion solid always K049?
| Code | When it fits |
|---|---|
| K049 | Slop oil emulsion solids from the petroleum refining industry. |
| K048 | Dissolved air flotation (DAF) float from the petroleum refining industry. |
| K051 | API separator sludge from the petroleum refining industry. |
| K052 | Tank bottoms (leaded) from the petroleum refining industry. |
| K169 | Crude oil storage tank sediment from petroleum refining operations. |
| K170 | Clarified slurry-oil tank sediment, in-line filter or separation solids, or both, from petroleum refining. |
The industry, production step and waste form tell these K listings apart, not the chemicals in the waste. The rows above are only the nearby listed streams, so also add any characteristic or other listing that fits. One waste can carry more than one federal code.
Which wastes take K049?
| Waste | When it’s K049 |
|---|---|
| Petroleum refinery slop-oil solids | It is a slop-oil emulsion solid from the petroleum refining industry |
Which codes sit beside K049?
| Code | What it is |
|---|---|
| K043 | 2,6-dichlorophenol waste from making the herbicide 2,4-D |
| K044 | Wastewater sludge from making or processing explosives |
| K045 | Spent carbon from treating explosives wastewater |
| K046 | Wastewater sludge from making or loading lead-based explosive initiators |
| K047 | Pink or red wastewater from TNT operations |
| K050 | Refinery heat-exchanger cleaning sludge |
| K060 | Lime sludge from a coke-plant ammonia still |
| K061 | Electric-furnace dust or sludge from primary steelmaking |
Sources
- 40 CFR 261.32 — Hazardous wastes from specific sources
- 40 CFR 261.3 — Definition of hazardous waste
- 40 CFR 261.4 — Exclusions
- 40 CFR 260.10 — Definitions
- 40 CFR 262.14 — Conditions for exemption for a very small quantity generator
- 40 CFR 262.20 — General requirements
- Hazardous Waste Manifest Instructions
- 40 CFR 261.7 — Residues of hazardous waste in empty containers
ComplyOnSite