Skip to content

Texas waste code finder

Texas form code 298 Nonhazardous oil-type liquid with a heavy PCB load.

  • Free, no account
  • Based on Texas Appendix 3 and TCEQ RG-022
  • Nothing is stored

Find a Texas waste code

298, PCB liquids, 500 ppm or more.

  • Organic liquids

    PCB liquids, 500 ppm or more

Nonhazardous liquid with at least 500 ppm PCBs.

Nonhazardous organic liquid with 500 ppm PCBs or more. Below 500 ppm, or if the waste is hazardous, it takes a different form.

Where does Texas form code 298 go in the Texas waste code?

In characters 5–7. The 8-character code is a 4-character stream sequence, then the 3-digit form 298, then a class character. Form 298 describes a stream in the organic liquids category.

This form needs nonhazardous waste. Industrial waste with PCBs at 50 ppm or more is Class 1 when it is not RCRA hazardous, and the PCB form doesn't make that call.

For a hazardous or Class 1 shipment on a Uniform Hazardous Waste Manifest, enter the full Texas code in Item 13, across 2 blocks on paper. Put any EPA waste codes beside it. The 3 form digits alone are not enough.

The generator sets the class from exclusions, federal hazardous-waste listings and characteristics, then Texas industrial-waste criteria. H means hazardous, and 1, 2 and 3 are nonhazardous industrial classes. Process knowledge or testing backs the decision. Picking a form doesn't set the class.

What does Texas form code 298 cover?

A mainly organic, nonhazardous liquid with PCBs at 500 ppm or more. The upper band starts at 500 ppm and applies only to liquid. PCB solids, soils, equipment and sludges have their own forms.

Category
organic liquids
Official wording
Appendix 3, form 298

Is nonhazardous PCB liquid Texas form code 298 or 297?

CodeWhen it fits
298The nonhazardous organic liquid holds PCBs at 500 ppm or more.
297The nonhazardous organic liquid holds PCBs at 50 to under 500 ppm.
395The nonhazardous inorganic solid holds PCBs at 500 ppm or more.

A hazardous stream needs another best-fitting form, and a PCB level alone doesn't make a waste nonhazardous.

Which wastes take Texas form code 298?

WasteWhen it’s 298
PCB wasteNonhazardous organic liquid in the upper PCB band.
PCB-contaminated liquidNonhazardous organic liquid in the upper PCB band.

Which codes sit beside Texas form code 298?

CodeWhat it is
208Concentrated phenol compounds
209Organic paint, ink, lacquer or varnish
210Liquid glue or epoxy adhesive
211Paint thinner or petroleum distillates
212Reactive or polymerizable organic liquid
219Other organic liquids
296Ethylene glycol antifreeze
299Nonhazardous organic photo chemicals