Texas form code 210 Wet, uncured glue & 2-part resin waste.
- Free, no account
- Based on Texas Appendix 3 and TCEQ RG-022
- Nothing is stored
Find a Texas waste code
210, Liquid glue or epoxy adhesive.
Organic liquids
Liquid glue or epoxy adhesive
The adhesive has not cured into a solid resin or polymer.
ComplyOnSiteWhere does Texas form code 210 go in the Texas waste code?
In characters 5–7. The 8-character code is a 4-character stream sequence, then the 3-digit form 210, then a class character. Form 210 describes a stream in the organic liquids category.
The form doesn't give a hazard status. The stream's makeup, source and properties decide the class character after it.
For a hazardous or Class 1 shipment on a Uniform Hazardous Waste Manifest, enter the full Texas code in Item 13, across 2 blocks on paper. Put any EPA waste codes beside it. The 3 form digits alone are not enough.
The generator sets the class from exclusions, federal hazardous-waste listings and characteristics, then Texas industrial-waste criteria. H means hazardous, and 1, 2 and 3 are nonhazardous industrial classes. Process knowledge or testing backs the decision. Picking a form doesn't set the class.
What does Texas form code 210 cover?
Glues, adhesives and epoxies that are mainly organic and still liquid when discarded. Cured or polymerized material, and pumpable resin or tar sludge, have their own physical-form entries.
- Category
- organic liquids
- Official wording
- Appendix 3, form 210
- Coding guidance
- RG-022, Chapter 5 and Appendix F
Is waste glue or epoxy Texas form code 210?
| Code | When it fits |
|---|---|
| 210 | The discarded glue, adhesive or epoxy is still a freely flowing organic liquid. |
| 403 | The resin or other organic material has cured or polymerized into a nonpumpable solid. |
| 606 | The resin, tar or tarry material is a pumpable sludge. |
The form covers adhesives broadly, and epoxy adhesive is one type. The physical form at discard separates the liquid, solid and sludge entries.
Which wastes take Texas form code 210?
| Waste | When it’s 210 |
|---|---|
| Liquid adhesive or epoxy | The organic adhesive or epoxy waste is liquid. Cured polymer solids use 403. |