Texas form code 206 Used lube & machine oil that is not in the used-oil route.

Free, no account
Based on Texas Appendix 3 and TCEQ RG-022
Nothing is stored

Organic liquids
Waste oil

Waste oil outside the Chapter 324 used-oil route.

Waste oil outside the Chapter 324 used-oil route. Oil-water mixes take form 205 and oily sludge form 603.

Where does Texas form code 206 go in the Texas waste code?

In characters 5–7. The 8-character code is a 4-character stream sequence, then the 3-digit form 206, then a class character. Form 206 describes a stream in the organic liquids category.

The form doesn't give a hazard status. The stream's makeup, source and properties decide the class character after it.

For a hazardous or Class 1 shipment on a Uniform Hazardous Waste Manifest, enter the full Texas code in Item 13, across 2 blocks on paper. Put any EPA waste codes beside it. The 3 form digits alone are not enough.

The generator sets the class from exclusions, federal hazardous-waste listings and characteristics, then Texas industrial-waste criteria. H means hazardous, and 1, 2 and 3 are nonhazardous industrial classes. Process knowledge or testing backs the decision. Picking a form doesn't set the class.

What does Texas form code 206 cover?

Discarded liquid oil handled through the ordinary industrial or hazardous-waste route. The oil itself is the waste, not an oil-water mixture or sludge. Qualifying used oil managed under Chapter 324 needs its own check.

Category: organic liquids
Official wording: Appendix 3, form 206
Coding guidance: RG-022, Chapter 5 and Appendix F

Is waste oil Texas form code 206 or Chapter 324 used oil?

Code	When it fits
206	The stream is liquid waste oil outside the Chapter 324 route.
205	Oil and water form a liquid mixture or emulsion.
603	The waste is pumpable oily sludge.
Chapter 324 used-oil route	The oil meets the used-oil definition and the conditions for management under Chapter 324.

Used oil is not automatically nonhazardous. Qualifying recycled oil that is hazardous only because of use may stay under Chapter 324. Mixing with hazardous waste needs a separate check. The used-oil route sets out the conditions.

Which wastes take Texas form code 206?

Waste	When it’s 206
Used oil and waste oil	Waste oil outside the Chapter 324 used-oil route.
Spent cutting oil or metalworking fluid	Mostly oil, with no water-emulsion phase.

Which codes sit beside Texas form code 206?

Code	What it is
201	Concentrated solvent-water solution
202	Halogenated solvents
203	Nonhalogenated solvents
204	Mixed halogenated and other solvents
207	Water-based liquid, concentrated organics
208	Concentrated phenol compounds
209	Organic paint, ink, lacquer or varnish
210	Liquid glue or epoxy adhesive