Manitoba waste code EHS13 Flammable, irritating liquid used to make resins.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS13, Allyl chloride.
Manitoba Schedule B concentration codes
Allyl chloride
Manitoba total-mass limit: 100 mg/kg for Allyl chloride.
ComplyOnSiteIs Manitoba EHS13 hazardous waste?
Yes, when the Schedule B threshold is met. EHS13 is a Category 3 Provincial Waste Code. It applies when allyl chloride reaches the Schedule B limit of 100 mg/kg total concentration by mass.
The 3-digit provincial waste class goes in a separate field. It doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS13 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules apply.
What does Manitoba EHS13 cover?
This entry tests waste for allyl chloride. Find the total concentration by mass and compare it with 100 mg/kg. At or above that Schedule B figure, the waste is Category 3 and takes EHS13.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is allyl chloride always Manitoba EHS13?
| Code | When it fits |
|---|---|
| EHS13 | Total allyl chloride is 100 mg/kg or more by mass. |
Choose the code from what the waste is made of, its test result and where it came from. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks. One identifier doesn't replace them.