Waste code for spent solvents Used thinners & degreasers, with or without chlorine.
- Free, no account
- Based on official federal and provincial sources
- Nothing is stored
Find a Canadian waste code
Spent solvents: 28 codes.
Spent solvents
The solvent ingredients and halogen content distinguish the candidate categories. Deciding facts and exclusions.
Ontario organic wastes
Aromatic solvents (benzene-ring type)
Benzene-ring chemistry
When to use 211Manitoba organic wastes
Aromatic solvents (benzene-ring type)
Benzene-ring chemistry
When to use 211Alberta industrial organic waste categories
Aromatic solvents (benzene-ring type)
Benzene-ring chemistry
When to use 211Ontario organic wastes
Aliphatic solvents (non-aromatic type)
Non-aromatic molecular composition
When to use 212Manitoba organic wastes
Aliphatic solvents (non-aromatic type)
Non-aromatic molecular composition
When to use 212Alberta industrial organic waste categories
Aliphatic solvents (non-aromatic type)
Non-aromatic molecular composition
When to use 212Ontario organic wastes
Petroleum-distillate solvents
Distillation from petroleum
When to use 213Manitoba organic wastes
Petroleum-distillate solvents
Distillation from petroleum
When to use 213Alberta industrial organic waste categories
Petroleum-distillate solvents
Distillation from petroleum
When to use 213Ontario organic wastes
Halogen-containing solvent waste
Spent solvents containing at least 2% halogenated organic material by weight
When to use 241Manitoba organic wastes
Halogen-containing solvent waste
Halogen content of the material
When to use 241Alberta industrial organic waste categories
Halogen-containing solvent waste
Halogen content of the material
When to use 241Quebec organic solvents
Halogenated organic solvents
Spent solvents with total organic halogens above 0.15% by mass
When to use C01Quebec organic solvents
Non-halogenated organic solvents
Spent solvents with total organic halogens no higher than 0.15% by mass
When to use C02Basel Y waste stream codes
Organic-solvent process waste
Manufacturing, formulation or use origin
When to use Y6B.C. Schedule 7 wastes
Halogenated degreasing solvents
Solvent identity and degreasing use
When to use Type 1B.C. Schedule 7 wastes
Other halogenated solvent waste
Solvent identity and recovery fraction
When to use Type 2B.C. Schedule 7 wastes
Listed acetone/alcohol/ether solvents
Identity within the listed solvents
When to use Type 3B.C. Schedule 7 wastes
Cresol/nitrobenzene solvent waste
Exact chemical identity before use
When to use Type 4B.C. Schedule 7 wastes
Toluene/ketone solvent waste
Identity within this solvent group
When to use Type 5Alberta oilfield waste codes
Halogenated solvent or residue
Halogens in the spent solvent
When to use SOLHALB.C. hazardous-waste definition routes
TDG classes 2–6, 8 and 9
TDG classification and use status
When to use Definition (a)B.C. hazardous-waste definition routes
Waste containing tetrachloroethylene
Tetrachloroethylene concentration by mass
When to use Definition (h)Ontario F-series hazardous industrial wastes
Spent halogenated degreasing solvents
Degreasing use and original solvent blend
Ontario F-series hazardous industrial wastes
Other spent halogenated solvents
Named halogenated constituents in the original blend
Ontario F-series hazardous industrial wastes
Spent acetone, xylene and related solvents
Named non-halogenated constituents and original blend
Ontario F-series hazardous industrial wastes
Spent cresol, cresylic acid or nitrobenzene solvents
Cresol/nitrobenzene group and original blend
Ontario F-series hazardous industrial wastes
Spent toluene, ketone and related solvents
Listed toluene/ketone group and original blend
Other codes that mention it 7
Federal F source codes
Spent halogenated degreasing solvents
When to use F001Federal F source codes
Other spent halogenated solvents
When to use F002Federal F source codes
Spent acetone, xylene and related solvents
When to use F003Federal F source codes
Spent cresol, cresylic acid or nitrobenzene solvents
When to use F004Federal F source codes
Spent toluene, ketone and related solvents
When to use F005Federal K source codes
Carbamate and carbamoyl-oxime organic process waste
When to use K156Ontario K-series hazardous industrial wastes
Carbamate and carbamoyl-oxime organic process waste
Which Canadian codes fit spent solvents?
| Candidate | Place | Waste stream |
|---|---|---|
| 211 | Ontario | Aromatic solvents (benzene-ring type) |
| 211 | Manitoba | Aromatic solvents (benzene-ring type) |
| 211 | Alberta | Aromatic solvents (benzene-ring type) |
| 212 | Ontario | Aliphatic solvents (non-aromatic type) |
| 212 | Manitoba | Aliphatic solvents (non-aromatic type) |
| 212 | Alberta | Aliphatic solvents (non-aromatic type) |
| 213 | Ontario | Petroleum-distillate solvents |
| 213 | Manitoba | Petroleum-distillate solvents |
| 213 | Alberta | Petroleum-distillate solvents |
| 241 | Ontario | Halogen-containing solvent waste |
| 241 | Manitoba | Halogen-containing solvent waste |
| 241 | Alberta | Halogen-containing solvent waste |
| C01 | Quebec | Halogenated organic solvents |
| C02 | Quebec | Non-halogenated organic solvents |
| Y6 | Federal | Organic-solvent process waste |
| Type 1 | British Columbia | Halogenated degreasing solvents |
| Type 2 | British Columbia | Other halogenated solvent waste |
| Type 3 | British Columbia | Listed acetone/alcohol/ether solvents |
| Type 4 | British Columbia | Cresol/nitrobenzene solvent waste |
| Type 5 | British Columbia | Toluene/ketone solvent waste |
| SOLHAL | Alberta | Halogenated solvent or residue |
| Definition (a) | British Columbia | TDG hazardous-waste route |
| Definition (h) | British Columbia | Waste containing tetrachloroethylene |
| F001 | Ontario | Spent halogenated degreasing solvents |
| F002 | Ontario | Other spent halogenated solvents |
| F003 | Ontario | Spent acetone, xylene and related solvents |
| F004 | Ontario | Spent cresol, cresylic acid or nitrobenzene solvents |
| F005 | Ontario | Spent toluene, ketone and related solvents |
How do Canadian codes for spent solvents differ?
Ontario splits solvents into aromatic, aliphatic, petroleum distillate and halogenated. Quebec splits them into halogenated and non-halogenated organic solvents. The solvent's name and what it is mixed with decide the category.
In Quebec, C01 needs total organic halogens above 0.15% and C02 takes 0.15% or less. C03 covers chlorofluorocarbons used as solvents or cleaners.
How should spent solvents be described for collection in Canada?
The product SDS helps name the original solvent. Contamination picked up in use can change the classification, so describe the spent material.
| Exclusions and shipment rules |
|---|
| Alberta |
| British Columbia |
| Manitoba |
| Northwest Territories |
| Nova Scotia |
| Nunavut |
| Ontario |
| Prince Edward Island |
| Quebec |
| Yukon |
Sources
- Directive 058: Oilfield Waste Management Requirements for the Upstream Petroleum Industry
- Industrial Waste Identification and Management Options
- Hazardous Waste Regulation, Schedule 7
- Guide to hazardous waste and hazardous recyclable materials classification
- Hazardous Waste Generator Registration: provincial waste class code table
- Registration guidance manual, Appendix A: Ontario waste classes
- Registration guidance manual, section 2: generator registration process
- R.R.O. 1990, Regulation 347: General — Waste Management
- Quebec hazardous-material management rules — Schedule 4 categories
- Quebec examples of residual hazardous-material identification
ComplyOnSite