Alberta waste codes 159 codes for Alberta waste, from lists to waste types.
- Free, no account
- Based on official Alberta sources
- Nothing is stored
Find a Canadian waste code
Pick a waste or type one, and the codes for it show here, province by province.
How are Alberta waste codes identified?
Alberta has industrial categories and AER upstream oilfield codes, and each serves a different waste route.
How is Alberta hazardous waste collected and shipped?
Alberta supplies numbered paper manifest forms. Generators based in Alberta, or a waste broker acting for them, can order the forms. Supplements are available for multiple carriers and multiple consignors.
For a regulated hazardous-waste disposal shipment, the consignor fills in the waste details on the Alberta hazardous waste manifest, the carrier completes Part B and the receiver completes Part C. Hazardous recyclables and dangerous oilfield waste have separate routes, described below.
When is Alberta waste excluded or below the paperwork threshold?
| Place | Exclusions, thresholds and applicable routes |
|---|---|
| Alberta | A waste is hazardous in Alberta only if it has a Schedule 1 property or is listed through Schedule 1, and no Schedule 2 exclusion applies. section 1(v); Schedule 1; Schedule 2 A liquid is ignitable hazardous waste when its tested flash point is 60.5°C or lower. Schedule 1, section 1(a) A waste is corrosive hazardous waste when its tested pH is below 2.0 or above 12.5. Schedule 1, section 1(e) A waste is hazardous for PCBs only where the PCB concentration is at least 50 mg/kg. Schedule 1, section 1(f) A dispersible waste can be hazardous as a toxic leachate where it meets the Alberta User Guide Table 1 or Table 2 limits, or contains more than 0.001 mg/L of the listed chlorinated dioxins or furans. A waste need not be dangerous goods to require Alberta waste paperwork. Schedule 1, section 1(g) Household waste is not hazardous waste while it remains with the householder or remains unsegregated in a municipal waste-management system. The exclusion does not say that segregated commercial or municipal loads are household waste. Schedule 2, section 1(a) A non-Part-B waste is outside Alberta's hazardous-waste rules only when a generator produces less than 5 kg a month as a solid or less than 5 L a month as a liquid and never accumulates more than 5 kg or 5 L at one time. Both conditions must be met. Schedule 2, section 1(g) The small-quantity exclusion does not apply to substances listed in Part B of Table 4 of the Alberta User Guide for Waste Managers. Schedule 2, section 1(g) Agricultural waste generated by a farmer is not hazardous waste under this regulation. section 1(b), (r); Schedule 2, section 1(b) Domestic sewage, biomedical waste and waste regulated under the federal Nuclear Safety and Control Act are not hazardous waste under this regulation. Schedule 2, sections 1(c), 1(d) and 1(f) Emergency spill clean-up waste is excluded only when the Director or an investigator authorizes how the clean-up debris is handled. Schedule 2, section 1(e) Waste resulting from hazardous-waste treatment is excluded only when the treatment method, technique or process represents acceptable industry practice. Schedule 2, section 1(h) Alberta lists approved industry practices for car-wash sump waste, chemically treated wood, coal ash, asbestos, used vehicle oils and filters, mercury lamps and articles, and used oil as dust suppressant. Each practice has its own conditions, and its title alone is not a blanket exclusion. Acceptable industry practices Ordinary demolition debris, concrete, asphalt, glass, ceramics, scrap metal and dry untreated timber can be inert waste only when disposal or reuse is not reasonably expected to cause material physical, chemical or biological change producing an adverse effect. section 1(w.1) Chemically treated timber is not included in the regulation's examples of inert dry timber. Check the chemically treated wood acceptable industry practice and the waste's actual hazardous properties. section 1(w.1); Schedule 1 and Schedule 2, section 1(h) Petroleum-contaminated soil has no general Schedule 2 exclusion. Classify it from its composition and Schedule 1 properties. Use an oilfield route only when it comes from the upstream facilities, wells or pipelines in the oilfield-waste definition. sections 1(cc), 1(hh.1); Schedules 1 and 2 Asbestos is non-hazardous waste in Alberta and must not be put on an Alberta hazardous-waste manifest. It can still need a dangerous-goods shipping document. Transportation of dangerous goods Dangerous oilfield waste stays on the Alberta Energy Regulator route and doesn't use an Alberta hazardous-waste manifest unless it is exported from Alberta. Hazardous waste manifest A recyclable with a Schedule 1 hazardous property is a hazardous recyclable. Recycling changes the regulatory route but doesn't make the material non-hazardous. section 1(t), 1(gg); Schedule 1, sections 1 and 3 Every Schedule 2 hazardous-waste exclusion also applies when the same material is intended for recycling. Schedule 2, section 2 The regulation exempts consignments below 205 L or 205 kg of hazardous recyclables from section 169 of the Act. It does not expressly exempt exactly 205 L or 205 kg. section 17(1) Current Alberta guidance says a recycle docket is required above 205 L or 205 kg. That differs from the regulation's “less than 205” exemption at exactly 205, so confirm the boundary before shipping exactly 205 L or 205 kg. Recycle docket A hazardous recyclable sent to an oilfield waste-management facility is exempt from section 169(b) of the Act. section 17(2) Hazardous waste going to an on-site facility is exempt from the consignor and carrier requirements in sections 188 and 191 of the Act only when the operation complies with the Transportation of Dangerous Goods Regulations. section 4 An empty container contains less than 2.5 cm of residue or less than 3% of its original contents, whichever amount is smaller. section 1(q) A container holding a Part A Table 4 product is listed as hazardous waste only when it is not empty and its internal volume exceeds 5 L, or the aggregate internal volume of several such containers exceeds 5 L. Independently hazardous properties can still apply. Schedule 1, sections 2(c) and 2(d) An unrinsed empty container that held a Part B Table 4 product is listed as hazardous waste when its internal volume exceeds 5 L, or the aggregate internal volume exceeds 5 L. Triple rinsing uses clean suitable solvent equal to 10% of container volume for each rinse, unless the Director accepts an equally effective method. section 1(kk); Schedule 1, sections 2(f) and 2(g) Do not mix or divide hazardous waste to dilute it or avoid the regulation. section 16 |
What applies to loads leaving Alberta?
For loads leaving Alberta, read the Federal exclusions and movement documents.
Alberta’s 159 waste codes
Grouped by the schedule or class list each comes from. Each code links to its page.
Alberta industrial inorganic waste categories 26 codes
Alberta industrial inorganic waste categories: what each code covers
- 111 Spent pickling acid
- 112 Heavy-metal acid waste
- 113 Other metal/non-metal acid waste
- 114 Other inorganic acid waste
- 121 Heavy-metal alkaline waste
- 122 Other cyanide-free alkaline waste
- 123 Alkaline phosphate waste
- 131 Neutralized heavy-metal waste
- 132 Other neutralized metal waste
- 133 Brine and chlor-alkali residues
- 134 Sulphide-bearing waste
- 135 Other anion-bearing waste
- 136 Produced water, along with brines of a similar type
- 141 Inorganic pigment production waste
- 142 Primary lead/zinc/copper smelting waste
- 143 Steelmaking residue
- 144 Liquid tannery sludge
- 145 Paint/pigment/coating waste
- 146 Other inorganic sludge and solids
- 147 Discarded chemical fertilizer
- 148 Other inorganic waste chemicals
- 149 Landfill leachate
- 150 Inert inorganic waste
- 151 Discarded batteries
- 152 Empty containers, packages and bags
- 153 Mercury and sodium fluorescent lamps
Alberta industrial organic waste categories 29 codes
Alberta industrial organic waste categories: what each code covers
- 211 Aromatic solvents (benzene-ring type)
- 212 Aliphatic solvents (non-aromatic type)
- 213 Petroleum-distillate solvents
- 221 Light fuels
- 231 Latex residue
- 232 Polymer resins
- 233 Other polymer waste
- 241 Halogen-containing solvent waste
- 242 Halogen-containing pesticide/herbicide waste
- 243 PCB waste
- 251 Petroleum oil and sludge
- 252 Crankcase oil and lubricants
- 253 Oil emulsions
- 254 Transfer/processing-site oil and water
- 261 Pharmaceutical waste
- 262 Soap and detergent waste
- 263 Other organic waste chemicals
- 264 Photographic-processing waste
- 265 Graphic-arts waste
- 266 Phenol-bearing waste
- 267 Organic acid waste
- 268 Amines (nitrogen-containing compounds)
- 269 Non-halogenated pesticide/herbicide waste
- 270 Other organic sludge and solids
- 271 Activated carbon waste
- 272 Drilling mud: fresh-water bentonite gel, sodium- or
- 273 Solutions of glycol
- 274 Materials used as sorbents
- 275 Filters after use
Alberta other industrial waste categories 4 codes
Alberta other industrial waste categories: what each code covers
Alberta disposal operation codes 15 codes
Alberta disposal operation codes: what each code covers
- D1 Disposal on or in land
- D2 Waste treatment in soil
- D3 Injection through a deep well
- D4 Surface containment of waste
- D5 Landfill with engineered isolated cells
- D6 Discharge to water excluding seas and oceans
- D8 Biological treatment before disposal
- D9 Physical or chemical treatment before disposal
- D10 Land-based waste incineration
- D10.1 Non-halogenated waste: high-temperature incineration
- D10.2 Halogenated waste: high-temperature incineration
- D12 Waste placed in permanent storage
- D13 Mixing waste before disposal
- D14 Repackaging waste before disposal
- D15 Storage until disposal
Alberta recovery operation codes 11 codes
Alberta recovery operation codes: what each code covers
- R1 Energy generation from waste
- R2 Reclaiming or regenerating solvent
- R3 Reclaiming organic substances other than solvents
- R4 Reclaiming metals and their compounds
- R5 Reclaiming other inorganic compounds
- R7 Recovering pollution-control components
- R8 Recovering catalyst components
- R9 Re-refining or reusing oil
- R10 Land treatment with agricultural or ecological benefit
- R12 Exchange before an R1–R10 operation
- R13 Accumulation until recycling
Alberta oilfield fallback waste codes 8 codes
Alberta oilfield fallback waste codes: what each code covers
Alberta oilfield waste codes 58 codes
Alberta oilfield waste codes: what each code covers
- ABSRAG Used absorbent materials
- ACID acid solutions
- ACTCRB activated carbon
- BATT Wet-cell or dry-cell batteries
- BLBDWT boiler blowdown water
- CATNS Catalyst without sulphur
- CATSU Sulphur catalyst
- CAUS caustic solutions
- CEMENT Drilling cement
- CONMAT Building and demolition material
- DESICT desiccant
- DOMWST Domestic refuse
- DRWSHC Hydrocarbon drilling waste
- DRWSWB Water-based drilling waste
- EMTCON empty containers
- FILMED Filtration medium
- FILTER filters
- FLBWTR Filter backwash water
- FRCSND Non-radioactive fracturing sand
- FRFLDH Hydrocarbon-based fracturing fluid
- FRFLDW Water-based fracturing fluid
- FRMFNS Formation fines remaining after treatment and settling
- GLYCOL glycol solutions
- HSPWTR high solids produced water
- HYDFLD hydrotest fluids
- HYDOIL Hydraulic or transmission oil
- HYDVNI Hydrovac material without impacts
- IEXMAT Ion-exchange resin or regenerant liquid
- INCASH incinerator ash
- IRNSPG iron sponge
- LDDOPE Lead-based pipe dope or grease
- LDTAPE Lead-based hydrogen-sulphide sensing tape
- LUBOIL Hydrocarbon or synthetic lubricating oil
- PIGWST Pipeline pigging material
- PROCHEM process chemicals
- PROWTR process water
- PSTHRB pesticides (also called herbicides)
- SAND produced sand
- SLGHYD sludge – hydrocarbon
- SLGLIM sludge – lime
- SLGOTH sludge – other
- SLGSUL sludge – sulphur
- SLTMED salt heat medium
- SMETAL metal – scrap
- SOILHYD Hydrocarbon-contaminated soil and debris
- SOILOTH Soil and debris with other contamination
- SOILSU Sulphur-contaminated soil and debris
- SOLHAL Halogenated solvent or residue
- SWTRIM surface water – impacted
- SWTWST sweetening agents
- THPROT Casing or tubing thread protectors
- TRTHAY treater hay
- WATER Produced water, including brine
- WOODCT Chemically treated or cooling-tower wood
- WPAINT paints
- WSHFLD wash fluids
- WSTEML Residue after treating a crude-oil or condensate emulsion
- WWOFLD Fluid from well workover
Alberta oilfield special-handling waste codes 8 codes
Alberta oilfield special-handling waste codes: what each code covers
ComplyOnSite