Manitoba waste code EHS130 Corrosive liquid used in chemical making.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS130, Phosphorus oxychloride.
Manitoba Schedule B concentration codes
Phosphorus oxychloride
Manitoba total-mass limit: 100 mg/kg for Phosphorus oxychloride.
ComplyOnSiteIs Manitoba EHS130 hazardous waste?
Yes, when the Schedule B threshold is met. EHS130 is a Category 3 Provincial Waste Code. It applies when phosphorus oxychloride reaches the Schedule B limit of 100 mg/kg total concentration by mass.
The 3-digit provincial waste class goes in a separate field. It doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS130 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules apply.
What does Manitoba EHS130 cover?
This entry tests waste for phosphorus oxychloride. Find the total concentration by mass and compare it with 100 mg/kg. At or above that Schedule B figure, the waste is Category 3 and takes EHS130.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is phosphorus oxychloride always Manitoba EHS130?
| Code | When it fits |
|---|---|
| EHS130 | Total phosphorus oxychloride is 100 mg/kg or more by mass. |
Choose the code from what the waste is made of, its test result and where it came from. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks. One identifier doesn't replace them.