Manitoba waste code EHS154 Fuming, corrosive liquid used in rubber & chemical making. Limit 100 mg/kg.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS154, Sulphur monochloride.
Manitoba Schedule B concentration codes
Sulphur monochloride
Manitoba total-mass limit: 100 mg/kg for Sulphur monochloride.
ComplyOnSiteIs Manitoba EHS154 hazardous waste?
Yes, when the Schedule B threshold is met. EHS154 is a Category 3 Provincial Waste Code. Waste reaches it when sulphur monochloride makes up 100 mg/kg or more of the total mass.
The 3-digit provincial waste class goes in a separate field. It doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS154 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules apply.
What does Manitoba EHS154 cover?
Test the waste for sulphur monochloride. Work out the total concentration by mass and compare it with 100 mg/kg. At or above that Schedule B figure, the waste is hazardous-waste Category 3 and takes code EHS154.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is sulphur monochloride always Manitoba EHS154?
| Code | When it fits |
|---|---|
| EHS154 | Total sulphur monochloride is 100 mg/kg or more by mass. |
Choose the code from the waste's actual makeup, test result and source. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks. No single code replaces them.