Manitoba waste code EHS28 Smelly salt used in photography & textile work. Limit 100 mg/kg.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS28, Ammonium sulphide.
Manitoba Schedule B concentration codes
Ammonium sulphide
Manitoba total-mass limit: 100 mg/kg for Ammonium sulphide.
ComplyOnSiteIs Manitoba EHS28 hazardous waste?
Yes, when the Schedule B threshold is met. EHS28 is a Category 3 Provincial Waste Code. It applies when ammonium sulphide reaches the Schedule B total mass-concentration threshold of 100 mg/kg.
The 3-digit provincial waste class goes in a separate field. It describes the waste stream and doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS28 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules apply.
What does Manitoba EHS28 cover?
This code tests waste for ammonium sulphide. Measure total concentration by mass and compare it with 100 mg/kg. At or above that Schedule B figure, the waste is hazardous-waste Category 3 and takes code EHS28.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is ammonium sulphide always Manitoba EHS28?
| Code | When it fits |
|---|---|
| EHS28 | Total ammonium sulphide is 100 mg/kg or more by mass. |
Pick the code from the waste's actual composition, test result and source. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks that a code doesn't replace.