Manitoba waste code EHS63 Copper salt used in dyeing & as a catalyst.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS63, Cupric oxalate.
Manitoba Schedule B concentration codes
Cupric oxalate
Manitoba total-mass limit: 100 mg/kg for Cupric oxalate.
ComplyOnSiteIs Manitoba EHS63 hazardous waste?
Yes, when the Schedule B threshold is met. EHS63 is a Category 3 Provincial Waste Code. It applies when cupric oxalate reaches the Schedule B total mass-concentration threshold of 100 mg/kg.
The 3-digit provincial waste class goes in a separate field. It doesn’t replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS63 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules still apply.
What waste is Manitoba EHS63 for?
This entry tests waste for cupric oxalate. Measure the total concentration by mass. At 100 mg/kg or more, the Schedule B figure, the waste is Category 3 hazardous waste with code EHS63.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is cupric oxalate Manitoba EHS63 or another code?
| Code | When it fits |
|---|---|
| EHS63 | Total cupric oxalate is 100 mg/kg or more by mass. |
Pick the code from the waste’s actual composition, test result and source. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks. One identifier doesn’t replace them.