Manitoba waste code EHS92 Corrosive iron salt for water treatment & circuit board etching.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS92, Ferric chloride.
Manitoba Schedule B concentration codes
Ferric chloride
Manitoba total-mass limit: 100 mg/kg for Ferric chloride.
ComplyOnSiteIs Manitoba EHS92 hazardous waste?
Yes, when the Schedule B threshold is met. EHS92 is a Category 3 Provincial Waste Code. It applies when ferric chloride reaches the Schedule B total concentration of 100 mg/kg by mass.
The 3-digit provincial waste class goes in a separate field. It doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS92 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules still apply.
What does Manitoba EHS92 cover?
EHS92 tests waste for ferric chloride. Measure the total concentration by mass. At 100 mg/kg or more, the waste is hazardous-waste Category 3 with code EHS92.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is ferric chloride always Manitoba EHS92?
| Code | When it fits |
|---|---|
| EHS92 | Total ferric chloride is 100 mg/kg or more by mass. |
Pick the code from what the waste is made of, its test result and where it came from. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks, and a code doesn't replace them.