Texas form code 390 Rubble, slabs & demolition waste from an industrial site.

Free, no account
Based on Texas Appendix 3 and TCEQ RG-022
Nothing is stored

Inorganic solids
Nonhazardous concrete or construction debris

Nonhazardous concrete or construction debris from an industrial facility.

Nonhazardous concrete or construction debris from an industrial facility. Ordinary municipal debris is outside this catalog.

Where does Texas form code 390 go in the Texas waste code?

In characters 5–7. The 8-character code is a 4-character stream sequence, then the 3-digit form 390, then a class character. Form 390 describes the stream in the inorganic solids category. The waste must be shown to be nonhazardous before this form fits. The industrial Class 1, 2 or 3 is decided separately. The class character depends on what the stream is made of, where it came from and its properties.

For a hazardous or Class 1 shipment that needs a Uniform Hazardous Waste Manifest, enter the full Texas code in Item 13, across 2 blocks on paper. Add any EPA waste codes. The 3 form digits alone are not enough.

The generator sets the class. Work through the exclusions, then the federal hazardous-waste listings and characteristics, then the Texas industrial-waste criteria. H means hazardous. 1, 2 and 3 are nonhazardous industrial classes. Process knowledge or testing backs the class. Choosing a form doesn't set it.

What does Texas form code 390 cover?

Nonhazardous concrete, cement or construction debris, nonpumpable and inorganic. The waste must be shown to be nonhazardous. This form doesn't make mixed debris nonhazardous or Class 3. General industrial-waste scope still applies.

Category: inorganic solids
Official wording: Appendix 3, form 390
Coding guidance: RG-022, Chapter 5 and Appendix F

Is industrial construction debris Texas form code 390 or 488?

Code	When it fits
390	Nonpumpable inorganic nonhazardous concrete, cement or construction debris in the Texas industrial-waste system.
488	Separated nonpumpable wood debris, not mixed construction debris.
307	Separated metal scale, filings or scrap that still needs a form code.
301	Separated soil contaminated with organic material.

Separate out excluded, hazardous or specifically described materials. Nonhazardous waste from a nonindustrial source is outside this system. A matching debris form doesn't itself prove industrial scope or a disposal destination.

Which wastes take Texas form code 390?

Waste	When it’s 390
Construction and demolition debris	Nonhazardous concrete, cement or construction debris.

Which codes sit beside Texas form code 390?

Code	What it is
316	Other metal salts
319	Other inorganic solids
388	Empty or crushed glass containers
389	Nonhazardous inorganic sandblasting waste
391	Nonhazardous dewatered wastewater sludge
392	Nonhazardous dewatered air-control sludge
393	Catalyst (reaction aid), inorganic solid
394	PCB inorganic solids, 50 to under 500 ppm