Texas form code 394 Nonhazardous mineral solids with a light PCB load.
- Free, no account
- Based on Texas Appendix 3 and TCEQ RG-022
- Nothing is stored
Find a Texas waste code
394, PCB inorganic solids, 50 to under 500 ppm.
Inorganic solids
PCB inorganic solids, 50 to under 500 ppm
Nonhazardous inorganic solid with 50 ppm to under 500 ppm PCBs.
ComplyOnSiteWhere does Texas form code 394 go in the Texas waste code?
In characters 5–7. The 8-character code is a 4-character stream sequence, then the 3-digit form 394, then a class character. Form 394 describes the stream in the inorganic solids category. This form needs nonhazardous waste. Industrial waste with PCBs at 50 ppm or more is Class 1 when it isn't RCRA hazardous, and the PCB form doesn't decide that. The class character depends on what the stream is made of, where it came from and its properties.
For a hazardous or Class 1 shipment that needs a Uniform Hazardous Waste Manifest, enter the full Texas code in Item 13, across 2 blocks on paper. Add any EPA waste codes. The 3 form digits alone are not enough.
The generator sets the class. Work through the exclusions, then the federal hazardous-waste listings and characteristics, then the Texas industrial-waste criteria. H means hazardous. 1, 2 and 3 are nonhazardous industrial classes. Process knowledge or testing backs the class. Choosing a form doesn't set it.
What does Texas form code 394 cover?
Mainly inorganic, nonhazardous solid waste with PCBs at 50 ppm or more but below 500 ppm. Soil and electrical equipment in this band have their own entries, and the rules don't say which wins when solid descriptions overlap.
- Category
- inorganic solids
- Official wording
- Appendix 3, form 394
- Coding guidance
- RG-022, Chapter 5 and Appendix F
Is nonhazardous inorganic PCB waste Texas form code 394 or 395?
| Code | When it fits |
|---|---|
| 394 | Nonhazardous inorganic solid with PCBs at 50 to under 500 ppm. |
| 395 | Nonhazardous inorganic solid with PCBs at 500 ppm or more. |
| 396 | Nonhazardous inorganic electrical equipment with PCBs at 50 to under 500 ppm. |
| 398 | Nonhazardous inorganic soil with PCBs at 50 to under 500 ppm. |
Record the material, its inorganic composition, the nonhazardous determination and the PCB result separately. Hazardous waste doesn't fit this form, but that alone doesn't make it an organic-category form.
Which codes sit beside Texas form code 394?
| Code | What it is |
|---|---|
| 388 | Empty or crushed glass containers |
| 389 | Nonhazardous inorganic sandblasting waste |
| 390 | Nonhazardous concrete or construction debris |
| 391 | Nonhazardous dewatered wastewater sludge |
| 392 | Nonhazardous dewatered air-control sludge |
| 393 | Catalyst (reaction aid), inorganic solid |
| 397 | PCB inorganic devices, 500 ppm or more |
| 399 | PCB inorganic soil, 500 ppm or more |