M230 waste code NSW Amine used to harden sand moulds in foundries.
- Free, no account
- NSW waste regulation and EPA tracking guidance
- Nothing is stored
Find an Australian waste code
M230, Triethylamine foundry-sand catalyst.
New South Wales
Triethylamine foundry-sand catalyst
New South Wales M230: triethylamine is the catalyst used to harden sand moulds in foundries.
ComplyOnSiteIs NSW M230 hazardous waste?
Not from the code alone. M230 marks a waste that may need tracking. Tracking under Part 4 needs a matching Schedule 1 waste description and a Part 3 hazardous characteristic. That test is separate from the NSW disposal classification, and the code gives no disposal class. Part 4 covers local and interstate movements.
Where tracking applies, enter M230 in the waste-code field of the IWTS Movement, with the description, quantity, parties and the receiver's Movement Authorisation. The approved system issues the Movement reference. NSW tracking exemptions still apply.
What does NSW M230 cover?
Triethylamine catalysts used to set sand in foundries. It must be triethylamine, and it must have been used to set foundry sand.
- Official wording
- Waste that needs to be tracked
- Rule or list
- Waste that needs to be tracked
Is foundry-sand catalyst waste NSW M230?
| Code | When it fits |
|---|---|
| M230 | Triethylamine was the catalyst that set the foundry sand. |
Check the waste description and the movement scope. A match in another state or territory doesn't carry NSW's classification or tracking conditions over.
Which wastes take NSW M230?
| Waste | When it’s M230 |
|---|---|
| Foundry catalysts | The material is an amine or another nitrogen compound that this entry names. |