Manitoba waste code EHS169 Salt used in soldering flux & galvanizing. Limit 100 mg/kg.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS169, Zinc ammonium chloride.
Manitoba Schedule B concentration codes
Zinc ammonium chloride
Manitoba total-mass limit: 100 mg/kg for Zinc ammonium chloride.
ComplyOnSiteIs Manitoba EHS169 hazardous waste?
Yes, when the Schedule B threshold is met. EHS169 is a Category 3 Provincial Waste Code. Waste reaches it when zinc ammonium chloride makes up 100 mg/kg or more of the total mass.
The 3-digit provincial waste class goes in a separate field. It doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS169 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules apply.
What does Manitoba EHS169 cover?
Test the waste for zinc ammonium chloride. Work out the total concentration by mass and compare it with 100 mg/kg. At or above that Schedule B figure, the waste is hazardous-waste Category 3 and takes code EHS169.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is zinc ammonium chloride always Manitoba EHS169?
| Code | When it fits |
|---|---|
| EHS169 | Total zinc ammonium chloride is 100 mg/kg or more by mass. |
Choose the code from the waste's actual makeup, test result and source. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks. No single code replaces them.