Manitoba waste code EHS171 Salt used in soldering flux & wood preservatives. Limit 100 mg/kg.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS171, Zinc chloride.
Manitoba Schedule B concentration codes
Zinc chloride
Manitoba total-mass limit: 100 mg/kg for Zinc chloride.
ComplyOnSiteIs Manitoba EHS171 hazardous waste?
Yes, when the Schedule B threshold is met. EHS171 is a Category 3 Provincial Waste Code. Waste reaches it when zinc chloride makes up 100 mg/kg or more of the total mass.
The 3-digit provincial waste class goes in a separate field. It doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS171 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules apply.
What does Manitoba EHS171 cover?
Test the waste for zinc chloride. Work out the total concentration by mass and compare it with 100 mg/kg. At or above that Schedule B figure, the waste is hazardous-waste Category 3 and takes code EHS171.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is zinc chloride always Manitoba EHS171?
| Code | When it fits |
|---|---|
| EHS171 | Total zinc chloride is 100 mg/kg or more by mass. |
Choose the code from the waste's actual makeup, test result and source. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks. No single code replaces them.