Manitoba waste code EHS36 Corrosive salt used in flame retardants. Limit 100 mg/kg.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS36, Antimony tribromide.
Manitoba Schedule B concentration codes
Antimony tribromide
Manitoba total-mass limit: 100 mg/kg for Antimony tribromide.
ComplyOnSiteIs Manitoba EHS36 hazardous waste?
Yes, when the Schedule B threshold is met. EHS36 is a Category 3 Provincial Waste Code. It applies when antimony tribromide reaches the Schedule B total mass-concentration threshold of 100 mg/kg.
The 3-digit provincial waste class goes in a separate field. It describes the waste stream and doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS36 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules apply.
What does Manitoba EHS36 cover?
This code tests waste for antimony tribromide. Measure total concentration by mass and compare it with 100 mg/kg. At or above that Schedule B figure, the waste is hazardous-waste Category 3 and takes code EHS36.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is antimony tribromide always Manitoba EHS36?
| Code | When it fits |
|---|---|
| EHS36 | Total antimony tribromide is 100 mg/kg or more by mass. |
Pick the code from the waste's actual composition, test result and source. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks that a code doesn't replace.