Manitoba waste code EHS38 White powder used in flame retardants & glass. Limit 100 mg/kg.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS38, Antimony trioxide.
Manitoba Schedule B concentration codes
Antimony trioxide
Manitoba total-mass limit: 100 mg/kg for Antimony trioxide.
ComplyOnSiteIs Manitoba EHS38 hazardous waste?
Yes, when the Schedule B threshold is met. EHS38 is a Category 3 Provincial Waste Code. It applies when antimony trioxide reaches the Schedule B total mass-concentration threshold of 100 mg/kg.
The 3-digit provincial waste class goes in a separate field. It describes the waste stream and doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS38 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules apply.
What does Manitoba EHS38 cover?
This code tests waste for antimony trioxide. Measure total concentration by mass and compare it with 100 mg/kg. At or above that Schedule B figure, the waste is hazardous-waste Category 3 and takes code EHS38.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is antimony trioxide always Manitoba EHS38?
| Code | When it fits |
|---|---|
| EHS38 | Total antimony trioxide is 100 mg/kg or more by mass. |
Pick the code from the waste's actual composition, test result and source. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks that a code doesn't replace.