Manitoba waste code EHS42 Corrosive liquid used to make dyes & peroxides.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS42, Benzoyl chloride.
Manitoba Schedule B concentration codes
Benzoyl chloride
Manitoba total-mass limit: 100 mg/kg for Benzoyl chloride.
ComplyOnSiteIs Manitoba EHS42 hazardous waste?
Yes, when the Schedule B threshold is met. EHS42 is a Category 3 Provincial Waste Code. It applies when benzoyl chloride reaches the Schedule B total mass-concentration threshold of 100 mg/kg.
The 3-digit provincial waste class goes in a separate field. It describes the waste stream and doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS42 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules apply.
What does Manitoba EHS42 cover?
This code tests waste for benzoyl chloride. Measure total concentration by mass and compare it with 100 mg/kg. At or above that Schedule B figure, the waste is hazardous-waste Category 3 and takes code EHS42.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is benzoyl chloride always Manitoba EHS42?
| Code | When it fits |
|---|---|
| EHS42 | Total benzoyl chloride is 100 mg/kg or more by mass. |
Pick the code from the waste's actual composition, test result and source. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks that a code doesn't replace.