Manitoba waste code EHS43 Tear-inducing liquid used to make plastics & dyes.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS43, Benzyl chloride.
Manitoba Schedule B concentration codes
Benzyl chloride
Manitoba total-mass limit: 100 mg/kg for Benzyl chloride.
ComplyOnSiteIs Manitoba EHS43 hazardous waste?
Yes, when the Schedule B threshold is met. EHS43 is a Category 3 Provincial Waste Code. It applies when benzyl chloride reaches the Schedule B total mass-concentration threshold of 100 mg/kg.
The 3-digit provincial waste class goes in a separate field. It describes the waste stream and doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS43 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules apply.
What does Manitoba EHS43 cover?
This code tests waste for benzyl chloride. Measure total concentration by mass and compare it with 100 mg/kg. At or above that Schedule B figure, the waste is hazardous-waste Category 3 and takes code EHS43.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is benzyl chloride always Manitoba EHS43?
| Code | When it fits |
|---|---|
| EHS43 | Total benzyl chloride is 100 mg/kg or more by mass. |
Pick the code from the waste's actual composition, test result and source. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks that a code doesn't replace.