Manitoba waste code EHS44 Toxic salt of the light metal used in alloys & electronics.
- Free, no account
- Based on Manitoba Regulation 195/2015 and program guidance
- Nothing is stored
Find a Canadian waste code
EHS44, Beryllium chloride.
Manitoba Schedule B concentration codes
Beryllium chloride
Manitoba total-mass limit: 100 mg/kg for Beryllium chloride.
ComplyOnSiteIs Manitoba EHS44 hazardous waste?
Yes, when the Schedule B threshold is met. EHS44 is a Category 3 Provincial Waste Code. It applies when beryllium chloride reaches the Schedule B total mass-concentration threshold of 100 mg/kg.
The 3-digit provincial waste class goes in a separate field. It describes the waste stream and doesn't replace the UN Number or Provincial Waste Code.
For regulated hazardous waste, enter EHS44 in the UN Number or Provincial Waste Code field on the Manitoba movement document. Manitoba’s registration and shipment rules apply.
What does Manitoba EHS44 cover?
This code tests waste for beryllium chloride. Measure total concentration by mass and compare it with 100 mg/kg. At or above that Schedule B figure, the waste is hazardous-waste Category 3 and takes code EHS44.
- Schedule
- B
- Hazardous-waste category
- 3
- Recorded threshold
- 100 mg/kg
- Official wording
- Hazardous Waste Regulation, M.R. 195/2015.php?reg=195%2F2015)
Is beryllium chloride always Manitoba EHS44?
| Code | When it fits |
|---|---|
| EHS44 | Total beryllium chloride is 100 mg/kg or more by mass. |
Pick the code from the waste's actual composition, test result and source. Provincial registration and movement rules, federal cross-border controls and TDG classification are separate checks that a code doesn't replace.