M220 waste code Queensland Reactive chemicals in polyurethane paint, foam & glue.
- Free, no account
- Environmental Protection Regulation 2019 and Queensland guidance
- Nothing is stored
Find an Australian waste code
M220, Isocyanates used in polyurethane products.
Queensland
Isocyanates used in polyurethane products
Queensland M220: these reactive chemicals are used in products such as polyurethane paints, foams and glues.
ComplyOnSiteIs Queensland M220 hazardous waste?
Not from the code alone. M220 is a Schedule 11 trackable-waste description. Tracking applies while the commercial or industrial waste stays regulated under section 42. Check the Schedule 9 exclusions and the section 42(4) test-out route before treating a movement as trackable. This code has no precedence mark when several descriptions fit.
For a tracked load, enter M220 as the waste code on the Queensland waste transport certificate. The generator completes Part 1, the transporter Part 2 and the receiver Part 3. Lodge it through an approved online, bulk-upload or numbered-paper route. The Queensland exclusions still apply.
What does Queensland M220 cover?
Isocyanate compounds used in products such as polyurethane foams, paints and glues. The code isn't limited to one product form.
- Official wording
- isocyanate compounds
- Rule or list
- Environmental Protection Regulation 2019
Is isocyanate waste Queensland M220?
| Code | When it fits |
|---|---|
| M220 | The waste contains an isocyanate compound. |
An asterisk in Queensland's tracking list marks which description wins when several fit. It is not an EWC hazardous-waste marker. A resource leaves the waste regime only when it meets its end-of-waste code or approval conditions.
Which wastes take Queensland M220?
| Waste | When it’s M220 |
|---|---|
| Isocyanate waste | Analysis confirms an isocyanate. |