A110 waste code Queensland Spent hardening & tempering salts that contain cyanide.
- Free, no account
- Environmental Protection Regulation 2019 and Queensland guidance
- Nothing is stored
Find an Australian waste code
A110, Cyanide heat-treatment waste.
Queensland
Cyanide heat-treatment waste
Queensland A110: heat treatment or tempering must be the source; surface-treatment waste belongs under A100.
ComplyOnSiteIs Queensland A110 hazardous waste?
Not from the code alone. A110 is a Schedule 11 trackable-waste description. Tracking applies while the commercial or industrial waste is regulated under section 42. Check the Schedule 9 exclusions and the section 42(4) test-out route before you decide whether a movement is trackable. This code has no precedence mark when several descriptions fit.
For a tracked load, enter A110 as the waste code on the Queensland waste transport certificate. The generator supplies Part 1, the transporter Part 2 and the receiver Part 3. Lodge it by the approved online, bulk-upload or numbered-paper route. The Queensland exclusions still apply.
What does Queensland A110 cover?
Waste from heat treatment or tempering where cyanide is used or the resulting waste contains cyanide, as the list states. Surface-treatment cyanide waste is separate, under A100.
- Official wording
- waste from a heat treatment or tempering operation that uses cyanides
- Rule or list
- Environmental Protection Regulation 2019
Is cyanide heat-treatment waste Queensland A110, A100 or A130?
| Code | When it fits |
|---|---|
| A110 | The cyanide-bearing waste arose from heat treatment or tempering. |
| A100 | The cyanide waste arose from treating a metal or plastic surface. |
| A130 | The waste is classified by inorganic cyanide content, not a named process. |
In Queensland's tracking list an asterisk sets precedence when several descriptions fit. It is not an EWC hazardous-waste marker. A resource leaves the waste regime only once it meets its end-of-waste code or approval conditions.
Which wastes take Queensland A110?
| Waste | When it’s A110 |
|---|---|
| Cyanide heat-treatment waste | The waste comes from heat treatment or tempering that used cyanide. |