Texas form code 113 Salty or mineral-heavy water with a lot dissolved in it.
- Free, no account
- Based on Texas Appendix 3 and TCEQ RG-022
- Nothing is stored
Find a Texas waste code
113, Water-based liquid, high dissolved solids.
Inorganic liquids
Water-based liquid, high dissolved solids
No more specific aqueous form describes the high-solids stream.
ComplyOnSiteWhere does Texas form code 113 go in the Texas waste code?
In characters 5–7. The 8-character code is a 4-character stream sequence, then the 3-digit form 113, then a class character. Form 113 describes a stream in the inorganic liquids category.
The form doesn't give a hazard status. The stream's makeup, source and properties decide the class character after it.
For a hazardous or Class 1 shipment on a Uniform Hazardous Waste Manifest, enter the full Texas code in Item 13, across 2 blocks on paper. Put any EPA waste codes beside it. The 3 form digits alone are not enough.
The generator sets the class from exclusions, federal hazardous-waste listings and characteristics, then Texas industrial-waste criteria. H means hazardous, and 1, 2 and 3 are nonhazardous industrial classes. Process knowledge or testing backs the decision. Picking a form doesn't set the class.
What does Texas form code 113 cover?
An aqueous waste with high dissolved solids and no more specific aqueous form. Keep a dissolved-solids result or the known process makeup to back the high-solids description.
- Category
- inorganic liquids
- Official wording
- Appendix 3, form 113
- Coding guidance
- RG-022, Chapter 5 and Appendix F
Is high dissolved-solids water Texas form code 113 or 114?
| Code | When it fits |
|---|---|
| 113 | The aqueous waste has high dissolved solids and no more specific form fits. |
| 114 | The aqueous waste has low dissolved solids and no more specific form fits. |
| 199 | The liquid is brine and the brine form is used. |
| 119 | The inorganic liquid fits no named inorganic-liquid form and Comments describe it. |
There is no number to split high from low. Appendix 3 also lets brine go here, and doesn't say whether it beats brine form 199.
Which wastes take Texas form code 113?
| Waste | When it’s 113 |
|---|---|
| High dissolved-solids wastewater | The aqueous waste has high dissolved solids. If it is more specifically brine, use form 199. |
| Boiler blowdown water | The blowdown is aqueous waste with high dissolved solids. |