Texas form code 114 Fairly clean water with little dissolved in it.
- Free, no account
- Based on Texas Appendix 3 and TCEQ RG-022
- Nothing is stored
Find a Texas waste code
114, Water-based liquid, low dissolved solids.
Inorganic liquids
Water-based liquid, low dissolved solids
No more specific aqueous form describes the low-solids stream.
ComplyOnSiteWhere does Texas form code 114 go in the Texas waste code?
In characters 5–7. The 8-character code is a 4-character stream sequence, then the 3-digit form 114, then a class character. Form 114 describes a stream in the inorganic liquids category.
The form doesn't give a hazard status. The stream's makeup, source and properties decide the class character after it.
For a hazardous or Class 1 shipment on a Uniform Hazardous Waste Manifest, enter the full Texas code in Item 13, across 2 blocks on paper. Put any EPA waste codes beside it. The 3 form digits alone are not enough.
The generator sets the class from exclusions, federal hazardous-waste listings and characteristics, then Texas industrial-waste criteria. H means hazardous, and 1, 2 and 3 are nonhazardous industrial classes. Process knowledge or testing backs the decision. Picking a form doesn't set the class.
What does Texas form code 114 cover?
An aqueous waste with low dissolved solids and no more specific aqueous form. Keep a dissolved-solids result or the known formulation to back the low-solids description.
- Category
- inorganic liquids
- Official wording
- Appendix 3, form 114
- Coding guidance
- RG-022, Chapter 5 and Appendix F
Is low dissolved-solids water Texas form code 114 or 113?
| Code | When it fits |
|---|---|
| 114 | The aqueous waste has low dissolved solids and no more specific form fits. |
| 113 | The aqueous waste has high dissolved solids and no more specific form fits. |
| 101 | The water-based liquid has low solvent content. |
| 102 | The water-based liquid has low levels of toxic organics other than solvents. |
The official form list gives no number to split high from low. Low dissolved solids also doesn't decide the waste class.
Which wastes take Texas form code 114?
| Waste | When it’s 114 |
|---|---|
| Industrial equipment washwater | The aqueous washwater has low dissolved solids and no more specific form applies. |
| Cooling tower or process cooling water | The aqueous waste has low dissolved solids. Reactive cooling water uses 112. |