Skip to content

Australian waste code finder

J160 waste code Queensland Tar & pitch left from refining, distilling & heat processing.

  • Free, no account
  • Environmental Protection Regulation 2019 and Queensland guidance
  • Nothing is stored

Find an Australian waste code

J160, Tarry refining and treatment residue.

  • Queensland

    Tarry refining and treatment residue

Queensland J160: the tarry residue must arise from refining, distillation or heat-driven decomposition.

Tarry residue from refining, distillation or pyrolysis, which is decomposition by heat. Includes tar & pitch left behind.

Is Queensland J160 hazardous waste?

Not from the code alone. J160 is a Schedule 11 trackable-waste description. A load is tracked while the commercial or industrial waste stays regulated under section 42. Check the Schedule 9 exclusions and the section 42(4) test-out route first, as they decide whether a movement is trackable. J160 has no precedence mark when several descriptions fit.

For a tracked load, enter J160 in the waste-code field of the Queensland waste transport certificate. The generator fills in Part 1, the transporter Part 2 and the receiver Part 3. Lodge it online, by bulk upload or on numbered paper, whichever route is approved. The Queensland exclusions still apply.

What does Queensland J160 cover?

Tarry residue from refining, distillation or pyrolytic treatment falls here. Both the tar-like residue and the process it came from matter, so tar waste from elsewhere doesn't qualify by name alone.

Official wording
tarry residues arising from refining, distillation or any pyrolytic treatment

Is tarry residue Queensland J160?

CodeWhen it fits
J160The tarry residue came from refining, distillation or pyrolytic treatment.

Where several descriptions fit, an asterisk in Queensland's tracking list decides which takes precedence. It is not an EWC hazardous-waste marker. A resource must meet its end-of-waste code or approval conditions before it leaves the waste regime.

Which wastes take Queensland J160?

WasteWhen it’s J160
Tarry residuesThe tarry residue comes from refining, distillation or pyrolysis.

Which codes sit beside Queensland J160?

CodeWhat it is
H110Organic phosphorus compounds
H170Wood-preservative chemical waste
J100Waste mineral oil
J120Oil-and-water mixtures
K100Animal-processing effluent and residue
K110Grease-trap waste
K130Sewage sludge and residue
K140Tannery waste from leather processing