Skip to content

Australian waste code finder

K130 waste code Queensland Septic tank, nightsoil & treatment plant sludge.

  • Free, no account
  • Environmental Protection Regulation 2019 and Queensland guidance
  • Nothing is stored

Find an Australian waste code

K130, Sewage sludge and residue.

  • Queensland

    Sewage sludge and residue

Queensland K130: this label varies by catalogue: check sewage sludge, septic material and reticulated-sewer boundaries.

Sewage sludge & residues, including nightsoil and septic tank sludge. A tracked waste category on the Queensland list.

Is Queensland K130 hazardous waste?

Not from the code alone. K130 is a Schedule 11 trackable-waste description. A load is tracked while the commercial or industrial waste stays regulated under section 42. Check the Schedule 9 exclusions and the section 42(4) test-out route first, as they decide whether a movement is trackable. K130 has no precedence mark when several descriptions fit.

For a tracked load, enter K130 in the waste-code field of the Queensland waste transport certificate. The generator fills in Part 1, the transporter Part 2 and the receiver Part 3. Lodge it online, by bulk upload or on numbered paper, whichever route is approved. The Queensland exclusions still apply.

What does Queensland K130 cover?

Sewage sludge and residues fall here. The Queensland and Tasmanian descriptions also include nightsoil, septic-tank sludge and sludge from an on-site wastewater management system, which goes beyond reticulated sewerage.

Official wording
sewage sludge and residues, including nightsoil and septic tank sludge

Is septic tank sludge Queensland K130?

CodeWhen it fits
K130The waste is sewage sludge, sewage residue or sludge from an on-site wastewater system.

Where several descriptions fit, an asterisk in Queensland's tracking list decides which takes precedence. It is not an EWC hazardous-waste marker. A resource must meet its end-of-waste code or approval conditions before it leaves the waste regime.

Which wastes take Queensland K130?

WasteWhen it’s K130
Sewage solids and sludgeThe residue is sewage sludge or nightsoil.
Septic tank wasteSeptic sludge falls within the broader sewage-residue entry.

Which codes sit beside Queensland K130?

CodeWhat it is
J120Oil-and-water mixtures
J160Tarry refining and treatment residue
K100Animal-processing effluent and residue
K110Grease-trap waste
K140Tannery waste from leather processing
K190Wool-scouring waste
K200Liquid food-processing waste
M100PCB, PCN, PCT or PBB material