Skip to content

Australian waste code finder

J120 waste code Queensland Bilge water, coolant slops & other oil mixed with water.

  • Free, no account
  • Environmental Protection Regulation 2019 and Queensland guidance
  • Nothing is stored

Find an Australian waste code

J120, Oil-and-water mixtures.

  • Queensland

    Oil-and-water mixtures

Queensland J120: use for an emulsion or mixture of water with oil or another hydrocarbon.

Water mixed or emulsified with oil or another hydrocarbon. A tracked waste category on the Queensland list.

Is Queensland J120 hazardous waste?

Not from the code alone. J120 is a Schedule 11 trackable-waste description. A load is tracked while the commercial or industrial waste stays regulated under section 42. Check the Schedule 9 exclusions and the section 42(4) test-out route first, as they decide whether a movement is trackable. J120 has no precedence mark when several descriptions fit.

For a tracked load, enter J120 in the waste-code field of the Queensland waste transport certificate. The generator fills in Part 1, the transporter Part 2 and the receiver Part 3. Lodge it online, by bulk upload or on numbered paper, whichever route is approved. The Queensland exclusions still apply.

What does Queensland J120 cover?

Waste oil mixed or emulsified with water falls here, and so do mixtures of water and other hydrocarbons. The water is what sets it apart from a waste-oil entry that doesn't mention water.

Official wording
oil and water mixtures or emulsions, or hydrocarbons and water mixtures or emulsions

Is oil-and-water waste Queensland J120 or J100?

CodeWhen it fits
J120Oil or another hydrocarbon is mixed or emulsified with water.
J100The waste is mineral oil that matches the J100 description.

Where several descriptions fit, an asterisk in Queensland's tracking list decides which takes precedence. It is not an EWC hazardous-waste marker. A resource must meet its end-of-waste code or approval conditions before it leaves the waste regime.

Which wastes take Queensland J120?

WasteWhen it’s J120
Oil and water mixturesThe waste is an oil-water mixture or emulsion.

Which codes sit beside Queensland J120?

CodeWhat it is
G160Other organic-solvent process waste
H100Biocide and crop-treatment chemical waste
H110Organic phosphorus compounds
H170Wood-preservative chemical waste
J160Tarry refining and treatment residue
K100Animal-processing effluent and residue
K110Grease-trap waste
K130Sewage sludge and residue