N205 waste code Queensland Ash, sludge & solids left by treating or disposing of industrial waste.
- Free, no account
- Environmental Protection Regulation 2019 and Queensland guidance
- Nothing is stored
Find an Australian waste code
N205, Industrial waste-treatment residue.
Queensland
Industrial waste-treatment residue
Queensland N205: the residue must come from an industrial waste treatment or disposal operation.
ComplyOnSiteIs Queensland N205 hazardous waste?
Not from the code alone. N205 is a Schedule 11 trackable-waste description. Tracking applies while the commercial or industrial waste stays regulated under section 42. Check the Schedule 9 exclusions and the section 42(4) test-out route before treating a movement as trackable. This code has no precedence mark when several descriptions fit.
For a tracked load, enter N205 as the waste code on the Queensland waste transport certificate. The generator completes Part 1, the transporter Part 2 and the receiver Part 3. Lodge it through an approved online, bulk-upload or numbered-paper route. The Queensland exclusions still apply.
What does Queensland N205 cover?
Residue left by treating or disposing of industrial waste falls here. It must come from that treatment or disposal operation. Coming from an industrial site isn't enough.
- Official wording
- residues from industrial waste treatment or disposal operations
- Rule or list
- Environmental Protection Regulation 2019
Is industrial waste-treatment residue Queensland N205?
| Code | When it fits |
|---|---|
| N205 | An industrial waste treatment or disposal operation produced the residue. |
An asterisk in Queensland's tracking list marks which description wins when several fit. It is not an EWC hazardous-waste marker. A resource leaves the waste regime only when it meets its end-of-waste code or approval conditions.
Which wastes take Queensland N205?
| Waste | When it’s N205 |
|---|---|
| Waste treatment residues | The residue comes from treating or disposing of waste. |