N150 waste code Queensland Fine ash caught from burning coal & other fuel.
- Free, no account
- Environmental Protection Regulation 2019 and Queensland guidance
- Nothing is stored
Find an Australian waste code
N150, Fly ash.
Queensland
Fly ash
Queensland N150 has no marked precedence when several descriptions fit.
ComplyOnSiteIs Queensland N150 hazardous waste?
Not from the code alone. N150 is a Schedule 11 trackable-waste description. Tracking applies while the commercial or industrial waste stays regulated under section 42. Check the Schedule 9 exclusions and the section 42(4) test-out route before treating a movement as trackable. This code has no precedence mark when several descriptions fit.
For a tracked load, enter N150 as the waste code on the Queensland waste transport certificate. The generator completes Part 1, the transporter Part 2 and the receiver Part 3. Lodge it through an approved online, bulk-upload or numbered-paper route. The Queensland exclusions still apply.
What does Queensland N150 cover?
Fine ash carried in combustion gases and collected as waste. It doesn't take in all the ash left after burning.
- Official wording
- fly ash
- Rule or list
- Environmental Protection Regulation 2019
Is fly ash Queensland N150?
| Code | When it fits |
|---|---|
| N150 | The material is fly ash collected from a combustion process. |
An asterisk in Queensland's tracking list marks which description wins when several fit. It is not an EWC hazardous-waste marker. A resource leaves the waste regime only when it meets its end-of-waste code or approval conditions.
Which wastes take Queensland N150?
| Waste | When it’s N150 |
|---|---|
| Fly ash | The fly ash comes from an industrial source on the list, subject to the stated power-station exclusions. |