M230 waste code Tasmania Amine catalyst used to harden moulds in metal casting.
- Free, no account
- Tasmanian Waste Management Regulations 2020 and EPA guidance
- Nothing is stored
Find an Australian waste code
M230, Triethylamine foundry-sand catalyst.
Tasmania
Triethylamine foundry-sand catalyst
Tasmania M230: triethylamine is the catalyst used to harden sand moulds in foundries.
ComplyOnSiteIs Tasmania M230 hazardous waste?
Not from the code alone. For national-list categories, Tasmania also needs a listed hazardous characteristic, which is presumed unless shown otherwise. Tasmania adds its own controlled wastes too, so read the category and the local rules together.
Put M230 with the specific waste description in the controlled-waste consignment documentation. Record the producer, quantity, form, contaminants, registered transporter and receiver. An incoming interstate controlled load needs EPA Tasmania's consignment authorisation, and another state's certificate doesn't authorise the receiving facility. Follow the Tasmanian handling and transport rules.
What does Tasmania M230 cover?
Triethylamine catalysts used to set foundry sand go here. Both the substance and the process matter. It must be triethylamine, used to set sand in a foundry.
- Official wording
- Controlled Waste Category Codes
- Rule or list
- Controlled Waste Category Codes
Is foundry catalyst waste Tasmania M230?
| Code | When it fits |
|---|---|
| M230 | Triethylamine was used as the catalyst for setting foundry sand. |
Work out what the material is and where it came from, then apply Tasmania's characteristic and approval rules. The code is not permission to transport, reuse or dispose of the load.
Which wastes take Tasmania M230?
| Waste | When it’s M230 |
|---|---|
| Foundry catalysts | The material is an amine or another nitrogen compound on the list. |