K130 waste code South Australia Solids drawn out of sewage treatment.
- Free, no account
- SA EPA waste-code and tracking tables
- Nothing is stored
Find an Australian waste code
K130, Sewage sludge and residue.
South Australia
Sewage sludge and residue
South Australia K130: this label varies by catalogue: check sewage sludge, septic material and reticulated-sewer boundaries.
ComplyOnSiteIs South Australia K130 hazardous waste?
Not from the code alone. The SA EPA operational code list and its table of waste requiring tracking are separate, so a code can be on one and not the other. The description doesn't approve a receiving facility or a disposal method.
K130 is in the SA table for waste requiring tracking, within the state or interstate. Enter it with the SA description on the WasteTracker transport certificate, against a matching consignment authorisation. The consignor, transporter and receiver each complete their own part. The SA tracking exemptions still apply.
What does South Australia K130 cover?
Sewage sludge and residues go here. The Queensland and Tasmanian descriptions also take nightsoil, septic-tank sludge and sludge from an on-site wastewater management system, so they reach beyond mains sewerage.
- Official wording
- Waste codes and descriptions
- Rule or list
- Waste codes and descriptions
Is sewage sludge South Australia K130?
| Code | When it fits |
|---|---|
| K130 | The waste is sewage sludge, sewage residue or a listed on-site wastewater sludge. |
Use the SA EPA operational entry for an SA load. The separate interstate Policy description is kept where its wording differs, but it doesn't replace the operational table or settle tracking on its own.
Which wastes take South Australia K130?
| Waste | When it’s K130 |
|---|---|
| Sewage solids and sludge | The residue is sewage sludge or nightsoil. |
| Septic tank waste | The material is septic sludge within the broader sewage-residue entry. |