F-listed waste codes Used solvents, plating sludges & other wastes from common industrial processes.
- Free, no account
- Based on 40 CFR Part 261 and EPA guidance
- Nothing is stored
Find a federal hazardous waste code
28 codes match.
F-listed waste 28
F-listed waste
Spent halogenated solvents used for degreasing
When to use F001F-listed waste
Spent halogenated solvents
When to use F002F-listed waste
Spent non-halogenated solvents: acetone, xylene and related solvents
When to use F003F-listed waste
Spent cresol, cresylic acid and nitrobenzene solvents
When to use F004F-listed waste
Spent toluene, methyl ethyl ketone (MEK) and related solvents
When to use F005F-listed waste
Wastewater sludge from electroplating
When to use F006F-listed waste
Spent cyanide plating-bath solution
When to use F007F-listed waste
Bottom residue from cyanide plating baths
When to use F008
What do the F-listed waste codes cover?
F codes cover spent solvents, metal finishing, dioxin-related processes, chlorinated chemical production, wood preserving, refinery sludges and leachate from several listed wastes.
How do I decide an F-listed waste code?
Match both the operation and its waste stream. A listed chemical in the waste doesn't make it an F code on its own.
Which guides go with the F-listed waste codes?
Guides include F001–F005 spent solvent codes, Electroplating waste codes and Wood preserving waste codes. Waste pages cover Used oil, Spent solvents and Parts washer solvent.
F-listed waste: 28 codes
Each code links to its page.
F-listed waste 28 codes
- F001 Spent halogenated solvents used for degreasing
- F002 Spent halogenated solvents
- F003 Spent non-halogenated solvents: acetone, xylene and related solvents
- F004 Spent cresol, cresylic acid and nitrobenzene solvents
- F005 Spent toluene, methyl ethyl ketone (MEK) and related solvents
- F006 Wastewater sludge from electroplating
- F007 Spent cyanide plating-bath solution
- F008 Bottom residue from cyanide plating baths
- F009 Spent cyanide baths used to strip or clean plated metal
- F010 Residue from cyanide oil-quench baths used in metal heat treating
- F011 Spent cyanide solution from cleaning heat-treatment salt pots
- F012 Wastewater sludge from cyanide metal-quench baths
- F019 Wastewater sludge from aluminum conversion coating
- F020 Waste from making or manufacturing use of tri- or tetrachlorophenol
- F021 Waste from making or manufacturing use of pentachlorophenol
- F022 Waste from using chlorobenzenes under alkaline conditions
- F023 Waste from equipment formerly used for chlorophenols
- F024 Process residues from making certain chlorinated hydrocarbons
- F025 Filters, drying agents and light residues from chlorinated hydrocarbons
- F026 Waste from equipment formerly used with alkaline chlorobenzenes
- F027 Unused chlorophenol formulations
- F028 Residue from heat-treating soil contaminated with listed dioxin waste
- F032 Waste from wood preserving with chlorophenol products
- F034 Waste from wood preserving with creosote
- F035 Waste from wood preserving with arsenic or chromium
- F037 Primary oil, water and solids separator sludge from a refinery
- F038 Secondary emulsified oil, water and solids sludge from a refinery
- F039 Leachate from more than one restricted listed hazardous waste