D300 waste code Queensland Harmless salts left over from industrial processes.
- Free, no account
- Environmental Protection Regulation 2019 and Queensland guidance
- Nothing is stored
Find an Australian waste code
D300, Non-toxic salts.
Queensland
Non-toxic salts
Queensland D300 has no marked precedence when several descriptions fit.
ComplyOnSiteIs Queensland D300 hazardous waste?
Not from the code alone. D300 is a Schedule 11 trackable-waste description. A load is tracked while the commercial or industrial waste stays regulated under section 42. Check the Schedule 9 exclusions and the section 42(4) test-out route first, as they decide whether a movement is trackable. D300 has no precedence mark when several descriptions fit.
For a tracked load, enter D300 in the waste-code field of the Queensland waste transport certificate. The generator fills in Part 1, the transporter Part 2 and the receiver Part 3. Lodge it online, by bulk upload or on numbered paper, whichever route is approved. The Queensland exclusions still apply.
What does Queensland D300 cover?
Non-toxic salt waste falls here. Victoria names sodium chloride and calcium chloride as examples. The other lists give the general category without naming salts.
- Official wording
- non-toxic salts
- Rule or list
- Environmental Protection Regulation 2019
Is salt waste always Queensland D300?
| Code | When it fits |
|---|---|
| D300 | The waste is a salt shown to be non-toxic. |
Where several descriptions fit, an asterisk in Queensland's tracking list decides which takes precedence. It is not an EWC hazardous-waste marker. A resource must meet its end-of-waste code or approval conditions before it leaves the waste regime.
Which wastes take Queensland D300?
| Waste | When it’s D300 |
|---|---|
| Saline effluent and non-toxic salts | Analysis or process knowledge shows the discarded material holds saline effluent. |